Service Manual

vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to 4094.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.3(0.0) Added support for multicast MAC address on the MXL platform.
Example (Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan 2 output—range
Gi 1/2,Gi 1/3}
ip vlan-ooding
Enable unicast data trac ooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Command History
Version 9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL platforms
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL platforms.
Default Disabled
Usage Information By default this command is disabled. There might be some ARP table entries which are resolved through
ARP packets which had Ethernet MAC SA dierent from MAC information inside the ARP packet. This
unicast data trac ooding occurs only for those packets which use these ARP entries.
Microsoft Network Load Balancing
913