Service Manual

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Example
Dell(conf)#ipv6 nd ra-guard policy test
Dell(conf-ra_guard_policy_list)#show config
!
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 251
mtu 1350
other-config-flag on
reachable-time 540
retrans-timer 101
router-preference maximum medium
trusted-port
Dell(conf-ra_guard_policy_list)#
Related Commands
• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.
• ipv6 nd ra-guard policy — Denes the RA guard policy name and enter the RA guard policy list
conguration mode.
• device-role — Species the role of the device attached to the port.
• hop-limit — Enables the verication of the advertised hop count limit.
• mtu — Sets the maximum transmission unit (MTU) value.
• other-cong-ag — Enables the verication of the advertised other conguration parameter.
• reachable-time — Sets the advertised reachability time.
• retrans-timer — Sets the advertised retransmission time.
• router-preference maximum — Enables the verication of the advertised default router preference
(DRP) value.
• trusted-port — Applies the policy to trusted ports.
show ipv6 nd ra-guard policy
Display the congurations applied on all the RA guard policies or a specic RA guard policy.
Syntax
show ipv6 nd ra-guard policy policy-name
Parameter
policy policy-name Enter the keyword policy then the policy name. The policy name allows a
maximum of 140 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
964
Neighbor Discovery Protocol (NDP)