Service Manual

Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Example
Dell#show ipv6 nd ra-guard policy test
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 1
match ra ipv6-access-list access
other-config-flag on
router-preference maximum medium
trusted-port
Interfaces :
Gi 1/1
Dell#
Related Commands
• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.
• ipv6 nd ra-guard policy — Denes the RA guard policy name and enter the RA guard policy list
conguration mode.
• device-role — Species the role of the device attached to the port.
• hop-limit — Enables the verication of the advertised hop count limit.
• mtu — Sets the maximum transmission unit (MTU) value.
• other-cong-ag — Enables the verication of the advertised other conguration parameter.
• reachable-time — Sets the advertised reachability time.
• retrans-timer — Sets the advertised retransmission time.
• router-preference maximum — Enables the verication of the advertised default router preference
(DRP) value.
• trusted-port — Applies the policy to trusted ports.
• ipv6 nd raguard attach-policy — Applies the IPv6 RA guard to a specic interface.
trusted-port
Allow bypassing the congured RA guard validation and forwards the RA packets received on the interface, which has the trusted
port policy attached.
Syntax
trusted-port
To reset the policy applied to the trusted port, use the no trusted-port command.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
Neighbor Discovery Protocol (NDP)
965