Service Manual

Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information
Use this command to create an object that tracks the reachability of an IPv4 route. In order for a route’s
reachability to be tracked, the route must appear as an entry in the routing table.
A tracked IPv4 route is considered to match an entry in the routing table only if the exact IPv4 address and
prex length match a table entry. For example, when congured as a tracked route, 10.0.0.0/24 does not
match the routing table entry 10.0.0.0/8. If no route-table entry has the exact IPv4 address and prex length,
the status of the tracked route is considered to be DOWN.
When you congure IPv4 route reachability as a tracked object, the UP/DOWN state of the tracked route is
also determined by the entry of the next-hop address in the ARP cache. A tracked route is considered to be
reachable if there is an ARP cache entry for the route's next-hop address.
If the next-hop address in the ARP cache ages out for a route tracked for its reachability, an attempt is
made to regenerate the ARP cache entry to if the next-hop address appears before considering the route
DOWN.
Related Commands
• show track – displays information about tracked objects, including conguration, current state, and
clients which track the object.
• track ip route metric threshold – congures object tracking on the threshold of an IPv4 route metric.
track resolution ip route
Congure the protocol-specic resolution value used to scale an IPv4 route metric.
Syntax
track resolution ip route {isis resolution-value | ospf resolution-value}
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
isis resolution-value Enter the resolution used to convert the metric in the routing table for ISIS routes
to a scaled metric.
ospf resolution-
value
Enter the resolution used to convert the metric in the routing table for OSPF
routes to a scaled metric.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
Object Tracking
977