Setup Guide
Conguring LLDP Notication Interval
This implementation has been introduced to adhere to the IEEE 802.1AB standard. This implementation allows a user to congure the LLDP
notication interval between 5 (default) and 3600 seconds.
NOTE:
Before implementation of this feature, notication messages were not throttled. After implementation, the system throttles the lldp
notication messages by 5 seconds (default) or as congured by the user.
lldpNoticationInterval can be congured through three methods:
• CLI — Through the snmp-notification-interval CLI.
– Example: snmp-notification-interval [5–3600]
• SNMP — Through the snmpset command.
– Example: snmpset —c public —v2c 10.16.127.10 LLDP-MIB::lldpNotificationInterval.0 I 20
• REST API — Through conguring by REST API method.
Conguring LLDP Notication Interval
This implementation has been introduced to adhere to the IEEE 802.1AB standard. This implementation allows a user to congure the LLDP
notication interval between 5 (default) and 3600 seconds.
NOTE
:
Before implementation of this feature, notication messages were not throttled. After implementation, the system throttles the lldp
notication messages by 5 seconds (default) or as congured by the user.
lldpNoticationInterval can be congured through three methods:
• CLI — Through the snmp-notification-interval CLI.
– Example: snmp-notification-interval [5–3600]
• SNMP — Through the snmpset command.
– Example: snmpset —c public —v2c 10.16.127.10 LLDP-MIB::lldpNotificationInterval.0 I 20
• REST API — Through conguring by REST API method.
Conguring Transmit and Receive Mode
After you enable LLDP, the system transmits and receives LLDPDUs by default.
To congure the system to transmit or receive only and return to the default, use the following commands.
• Transmit only.
CONFIGURATION mode or INTERFACE mode
mode tx
• Receive only.
CONFIGURATION mode or INTERFACE mode
mode rx
• Return to the default setting.
CONFIGURATION mode or INTERFACE mode
no mode
Link Layer Discovery Protocol (LLDP)
503