Users Guide

1 = Type 1 external route
2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map.
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Related Commands
redistribute — redistributes routes from other routing protocols into OSPF.
default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the redistribute command.
S3048–ON
Syntax
default-metric number
To return to the default values, use the no default-metric [number] command.
Parameters
number Enter a number as the metric. The range is from 1 to 16777214.
Defaults Disabled.
Command Modes ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3) 1009