Users Guide
ip ospf auth-change-wait-time
OSPF provides a grace period while OSPF changes its interface authentication type. During the grace period, OSPF sends out packets
with new and old authentication scheme until the grace period expires.
S3048–ON
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time command.
Parameters
seconds Enter the seconds. The range is from 0 to 300.
Defaults zero (0) seconds.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
ip ospf authentication-key
Enable authentication and set an authentication key on OSPF trac on an interface.
S3048–ON
Syntax
ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key command.
1020 Open Shortest Path First (OSPFv2 and OSPFv3)