Users Guide

tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPF.
The range is from 0 to 4294967295.
Defaults None
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added the keyword default.
pre- 6.1.1.1 Introduced on the E-Series.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
S3048–ON
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value | metric-type type-value] [route-map map-name]
[tag tag-value] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and
Level-2 routes.
1036 Open Shortest Path First (OSPFv2 and OSPFv3)