Users Guide

vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view information on AS
external LSAs corresponding to the OSPF processes that are tied to a specic VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the
LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router and the ip-address to display only the
LSA information about that router.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.1 Introduced on the E-Series.
Usage Information The following describes the show ip ospf process-id database external command shown in the
following example.
Field Description
LS Age Displays the LSA’s age.
Options Displays the optional capabilities available on router. The following options can be found in
this item:
• TOS-capability or No TOS-capability is displayed depending on whether the router
can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can support
OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS External LSAs.
Open Shortest Path First (OSPFv2 and OSPFv3) 1047