Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

101

102

103

104

105

106

107

108

109

110

ip ftp vrf

Congures an FTP client with a VRF that is used to connect to the FTP server.

Syntax

ip ftp [vrf {vrf-name | management}]

To undo the FTP client conguration, use the ip ftp [vrf vrf-name] command.

Parameters

vrf-name Enter the vrf-name to specify the VRF that is used by the FTP client.

management Enter the keyword management to specify that the VRF used by the FTP client is a

management VRF.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.0) Introduced on the Z9500.

9.4(0.0) Introduced on the S-Series and Z9000.

Usage Information Use this command to make the FTP clients VRF-aware. The VRF name that you specify is used by the FTP client

to reach the FTP server. If no VRF name is specied, then the default VRF is used.

ip telnet server enable

Enable the Telnet server on the switch.