Users Guide
After using this command to congure a VLAN as a primary VLAN, use the private-vlan mapping
secondary-vlan command to map secondary VLANs to this VLAN.
Related Commands
• private-vlan mapping secondary-vlan — maps secondary VLANs to the selected primary VLAN.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
S3048
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specic secondary VLANs from the conguration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
Parameters
vlan-list Enter the list of secondary VLANs to associate with the selected primary VLAN. The list
can be in comma-delimited or hyphenated-range format, following the convention for the
range input.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specied in comma-delimited or hyphenated-range format.
• Specied with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Private VLAN (PVLAN) 1159