Users Guide

reload
Reboot the system.
Syntax
reload [conditional nvram-cfg-change | no-confirm [discard-running] | dell-diag
| onie [install | uninstall | rescue]]
Parameters
conditional nvram-
cfg-change
(OPTIONAL) Reload into the Dell Networking Operating System (OS) if the condition is
true. A conguration change to the NVRAM requires a switch reload. To reload the
switch, select nvram-cfg-change.
no-conrm
[discard-running]
Reload the chassis without prompting for further conrmation.
dell-diag (OPTIONAL) Reload the system into the Dell diagnostics mode.
onie (OPTIONAL) Reload the system into the ONIE mode. You can also use one of the
following options to reload the system and enter the respective modes directly:
• install — enter the Install mode and install the networking OS
• uninstall — enter the Uninstall mode and uninstall the networking OS
•
rescue — enter the Rescue mode and access the le system
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0)
Added the optional dell-diag and onie parameters.
Introduced the no-confirm option.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
9.1(0.0) Added ‘conditional’ parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
118 Control and Monitoring