Users Guide
Related Commands
• service-queue — assigns a class map and QoS policy to dierent queues.
• service-policy input — applies an input policy map to the selected interface.
policy-map-output
Create an output policy map.
S3048–ON
Syntax
policy-map-output policy-map-name
To remove a policy map, use the no policy-map-output policy-map-name command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information To assign trac to dierent ows using QoS policy, use the Output Policy map. This command enables Policy-
Map-Output Conguration mode (conf-policy-map-out).
Related Commands
• service-queue — assigns a class map and QoS policy to dierent queues.
• policy-aggregate — allows an aggregate method of conguring per-port QoS using policy maps.
• service-policy output — applies an output policy map to the selected interface.
1198 Quality of Service (QoS)