Users Guide

Table 3. Default Mapping
DSCP/CP hex
Range (XXX)
DSCP
Denition
Traditional IP
Precedence
S6000 Internal
Queue ID
S-Series
Internal Queue
ID
DSCP/CP
Decimal
111XXX Network Control 7 3 48–63
110XXX Internetwork
Control
6 3 48–63
101XXX EF (Expedited
Forwarding)
CRITIC/ECP 5 2 32–47
100XXX AF4 (Assured
Forwarding)
Flash Override 4 2 32–47
011XXX AF3 Flash 3 1 16–31
010XXX AF2 Immediate 2 1 16–31
001XXX AF1 Priority 1 0 0–15
000XXX BE (Best Eort) Best Eort 0 0 0–15
wred
Designate the WRED prole to yellow or green trac.
S3048–ON
Syntax
wred {yellow | green} profile-name
To remove the WRED drop precedence, use the no wred {yellow | green} [prole-name] command.
Parameters
yellow | green Enter the keyword yellow for yellow trac. A DSCP value of xxx110 and xxx100, xxx101
maps to yellow.
Enter the keyword green for green trac. A DSCP value of xxx0xx are green and DSCP
111111 are red packets.
prole-name
Enter your WRED prole name in character format (32 character maximum). Or use one
of the ve pre-dened WRED prole names.
Pre-dened Proles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_.
Defaults When WRED green is applied, default WRED yellow proles take eect and vice-versa.
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
Quality of Service (QoS) 1223