Users Guide
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information If the specied color-map does not exist, the Diserv Manager (DSM) creates a color map and sets all the DSCP
values to green (low drop precedence).
The default setting for each DSCP value (0-63) is green (low drop precedence). This command allows setting the
number of specic DSCP values to yellow or red.
Important Points to Remember
• All DSCP values that are not specied as yellow or red are colored green.
• A DSCP value cannot be in both the yellow and red lists. Setting the red or yellow list with any DSCP value that
is already in the other list results in an error and no update to that list is made.
• Each color map can only have one list of DSCP values for each color; any DSCP values previously listed for that
color that are not in the new DSCP list are colored green.
Example
Dell(conf-dscp-color-map)# dscp yellow 9,10,11,13,15,16
Related Commands
• qos dscp-color-map — congures the DSCP color map.
• qos dscp-color-policy— congures a DSCP color policy.
qos dscp-color-map
Congure the DSCP color map.
Syntax
qos dscp-color-map map-name
To remove a color map, use the no qos dscp-color-map map-name command.
Parameters
map-name Enter the name of the DSCP color map. The map name can have a maximum of 32
characters.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
9.7(0.0) Introduced on the S6000-ON.
Quality of Service (QoS) 1227