Users Guide

Version Description
9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information A color map outlines the codepoint mappings to the appropriate color mapping (green, yellow, red) for the trac.
The system uses this information use to handle the trac on the interface based on the trac priority and places it
into the appropriate shaping queue. You cannot delete a DSCP color map when it is congured on an interface. If
you do, all the DSCP values are set to green (low drop precedence). To delete the DSCP color map that is being
used by one or more interfaces, remove the DSCP map from each interface.
Example
Dell(conf)#qos dscp-color-map mymap
Related Commands
• qos dscp-color-map— associates the DSCP color map prole with an interface so that all IP packets received
on it is given a color based on that color map.
• dscp— sets the number of specic DSCP values for color map prole to yellow or red.
qos dscp-color-policy
Associates the DSCP color map prole with an interface so that all IP packets received on it is given a color based on that color map.
Syntax
dscp-color-policy color-map-profile-name
To remove a color policy map prole, use the no dscp-color-policy color-map-profile-name
command.
Parameters
color-map-prole-
name
Enter the color map prole name. The name can have a maximum of 32 characters.
Defaults None
Command Modes CONFIG-INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
Version 9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information If the specied color-map does not exist, the Diserv Manager (DSM) creates a color map and sets all the DSCP
values to green (low drop precedence).
Example
The following example assigns the color map, bat-enclave-map, to interface gi 1/11.
Dell(conf)# int gi 1/11
Dell(conf-if-gi-1/11)# qos dscp-color-policy bat-enclave-map
Related Commands
• dscp— sets the number of specic DSCP values for color map prole to yellow or red.
1228 Quality of Service (QoS)