Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1311

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.5(0.1) Introduced lockout-period option on the Z9500.

9.5(0.0) Introduced lockout-period option on the Z9000, S6000, S4820T, S4810, and MXL.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.3.1.0 Introduced on the E-Series.

Example In the following example, after 5 un-successful login attempts, the session (SSH/TELNET) goes into a locked state

for 5 minutes. If all the 10 sessions are locked out with 5 un-successful attempts in each session, no users can login

during the lockout-period.

Dell(conf)# password-attributes max-retry 5 lockout-period 5

Related Commands

• password — species a password for users on terminal lines.

service password-encryption

Encrypt all passwords congured in Dell Networking OS.

Syntax

service password-encryption

To store new passwords as clear text, use the no service password-encryption command.

Defaults Enabled.

Command Modes CONFIGURATION