Users Guide
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, and MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Users entering EXEC Privilege mode or any other congured privilege level can access conguration commands. To
protect against unauthorized access, use the enable password command to congure a password for the
enable command at a specic privilege level. If no privilege level is specied, the default is privilege level 15.
NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an
enable password.
Related Commands
• enable password — congures a password for the enable command and to access a privilege level.
role
Changes command permissions for roles.
Syntax
role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Enter one of the following keywords as the mode for which you are controlling access:
congure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
1378 Security