Users Guide

addrole Enter the keyword addrole to add permission to the command. You cannot add or
delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add or
delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3 system
dened roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Related Commands
• userrole — creates user roles.
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or all of the keywords.
mode mode Enter keyword then one of the following modes.
• congure
• exec
• interface
• line
• route-map
• router
Defaults none
Security 1379