Users Guide
support-assist
Move to the SupportAssist conguration mode.
Syntax
support-assist
To remove all the conguration of the SupportAssist service, use the no support-assist command.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information If you reject the EULA, the data is not transmitted to the SupportAssist server.
Related Commands
• eula-consent — accept or reject the EULA.
support-assist activate
Enable the SupportAssist service.
Syntax
support-assist activate
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
You are guided through a series of queries to congure SupportAssist. The generated commands are added to the
running conguration, including the DNS resolve commands, if congured.
This command starts the conguration wizard for the SupportAssist. At any time, you can exit by entering Ctrl-C. If
necessary, you can skip some data entry.
support-assist activity
Trigger an activity event immediately.
Syntax
support-assist activity {full-transfer} start now
1488 SupportAssist