Users Guide
Version Description
6.1.1.0 Introduced on the E-Series.
Usage Information You also must congure an authentication key for NTP trac using the ntp authentication-key command.
ntp authentication-key
Specify a key for authenticating the NTP server.
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number Specify a number for the authentication key. The range is from 1 to 4294967295.
This number must be the same as the number parameter congured in the ntp
trusted-key command.
md5 Specify that the authentication key is encrypted using MD5 encryption algorithm.
0 Specify that authentication key is entered in an unencrypted format (default).
7 Specify that the authentication key is entered in DES encrypted format.
key Enter the authentication key in the previously specied format.
Defaults NTP authentication is not congured by default. If you do not specify the option [0 | 7], 0 is selected by default.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Added options [0 | 7] for entering the authentication key.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
After conguring the ntp authentication-key command, congure the ntp trusted-key command to
complete NTP authentication.
System Time and Date 1511