Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1541

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.3.1.0 Introduced on the C-Series and S-Series.

Usage Information Enable DEI before using this command.

member

Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible command in its

conguration.

Syntax

member interface

To remove an interface from a Stackable VLAN, use the no member interface command.

Parameters

interface Enter the following keywords and the interface information:

• For a Port Channel interface, enter the keywords port-channel, and then a

number.

• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the

slot/port information.

•

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

Defaults Not congured.

Command Modes CONF-IF-VLAN