Users Guide

Usage Information
Specify the matching criteria only after dening a route-map. Before using this command, you must enter Route
Map mode using the route-map route-map-name command. The match criteria that you specify is
associated with the route-map that you dene.
The export-target and import-target options support only the match protocol and match prex-list options. Other
options that you congure in the route-maps are ignored.
Related Commands
• ipv6 route-import – imports IPv6 routes from another VRF.
redistribute
Redistributes leaked or exported routes corresponding to specic protocols.
Syntax
redistribute {imported-bgp | import-ospf | import-isis}
Parameters
imported-bgp Enter the keywords imported-bgp to redistribute leaked routes that are learned using
the BGP protocol.
imported-ospf Enter the keywords imported-ospf to redistribute leaked routes that are learned using
the OSPF protocol.
imported-isis Enter the keywords imported-isis to redistribute leaked routes that are learned using
the ISIS protocol.
route-map Enter the name of the route-map to specify the ltering criteria for imported routes.
Command Modes
CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Related Commands
• ip route-import — import routes from another VRF.
interface management
Associates a management port with a management VRF.
Syntax
interface management
To delete the association between a management port and a management VRF, use the no interface
management command.
1560 Virtual Routing and Forwarding (VRF)