Users Guide

vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded from
doing proxy gateway. The value can be a single VLAN ID, comma-separated VLAN IDs, a
range of VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can congure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT proxy
gateway and exclude a VLAN, or a range of VLANs, from proxy routing.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address 00:01:e8:06:95:ac
exclude-vlan 3
Dell(conf-vlt-domain-proxy-gw-static)#
peer-domain-link port-channel exclude-vlan
Congure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or congure the VLANs you want to
exclude from VLT proxy gateway.
S3048–ON
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-range
Parameters
port-channel Congure the proxy-gateway interface port-channel.
interface-identier Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value can be a
single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a combination. For
example:
Comma-separated: 3, 4, 6
1566 VLT Proxy Gateway