Users Guide
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Examples The following sample output shows the line-by-line style display when using the show running-config acl-
vlan-group option. Note that no group or access list names are truncated
Dell #show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show running-config acl-vlan-group Test
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#
acl-vlan-group
Create an ACL VLAN group.
Syntax
acl-vlan-group {group name}
To remove an ACL VLAN group, use the no acl-vlan-group {group name} command.
Parameters
group-name Specify the name of the ACL VLAN group. The name can contain a maximum 140
characters.
Default No default behavior or values
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T and Z9000 platforms
Usage Information
You can have up to eight dierent ACL VLAN groups at any given time. When you congure an ACL VLAN group,
you enter the ACL VLAN Group Conguration mode.
To avoid the problem of excessive consumption of CAM area, you can congure ACL VLAN groups that combines
all the VLANs that are applied with the same ACL in a single group. A unique identier for each of ACL attached to
the VLAN is used as a handle or locator in the CAM area instead of the VLAN id. This method of processing
signciantly reduces the number of entries in the CAM area and saves memory space in CAM.
308 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)