Users Guide

If you do not congure the default-metric command, in addition to the redistribute command, or there
is no route map to set the metric, the metric for redistributed static and connected is “0”.
To redistribute the default route (0.0.0.0/0), congure the neighbor default-originate command.
As BGP does not query next-hop information corresponding to locally originated routes, a local route with an
unreachable next-hop is chosen as the best route.
When a combination of locally originated and peer originated routes occurs, both these routes will exist in the RTM.
However, only the best route is kept active in the RTM and the remaining route is rendered in-active.
It is possible to keep only one locally originated route in the BGP database. Network command has preference over
the re-distributed routes. When the locally originated route is no longer present in the database the other route is
automatically installed.
Related Commands
• neighbor default-originate — inject the default route.
redistribute ospf
Redistribute OSPF routes into BGP.
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match internal]]
[route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf process-id command.
Parameters
process-id Enter the number of the OSPF process. The range is from 1 to 65535.
match external {1 |
2}
(OPTIONAL) Enter the keywords match external to redistribute OSPF external
routes. You can specify 1 or 2 to redistribute those routes only.
match internal (OPTIONAL) Enter the keywords match internal to redistribute OSPF internal routes
only.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route map.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
Border Gateway Protocol 393