Users Guide

Field Description
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the destination network.
The show ip bgp command displays the dmzlink-dw details only if dmzlink-bw is enabled using the bgp
dmzlink-dw command.
Example
Dell# show ip bgp
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 55.0.0.0/24 172.16.0.2 0 200 i
*> 66.0.0.0/24 172.16.0.2 0 200 i
All the show and debugs commands display the link band width extended-community prexed with DMZ-Link-bw
along with other extended communities.
Dell# show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related Commands
• show ip bgp community — view the BGP communities.
• neighbor maximum-prex — control the number of network prexes received.
show ip bgp cluster-list
View BGP neighbors in a specic cluster.
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast] cluster-
list [cluster-id]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view cluster
information of BGP neighbors corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 multicast routes.
Border Gateway Protocol 399