Users Guide

ip-address (OPTIONAL) Enter the IP address of the neighbor to view only BGP information
exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes the
neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on dampened
routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specic internal information
for the IPv4 Unicast address family.
ap-statistics (OPTIONAL) Enter the keywords flap-statistics to view ap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible routes.
received-routes
[network [network-
mask]
(OPTIONAL) Enter the keywords received-routes then either the network address
(in dotted decimal format) or the network mask (in slash prex format) to view all
information received from neighbors.
NOTE: Congure the neighbor soft-reconfiguration inbound
command prior to viewing all the information received from the neighbors.
denied-routes
[network [network-
mask]
(OPTIONAL) Enter the keywords denied-routes then either the network address (in
dotted decimal format) or the network mask (in slash prex format) to view all
information on routes denied via neighbor inbound lters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Added the add-path option to the S4810. Output on the S4810 shows the ADDPATH
parameters.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Added the detail option. Output now displays the default MED value.
7.2.1.0 Added the received and denied route options.
6.3.10 The output is changed to display the total number of advertised prexes.
Border Gateway Protocol 415