Users Guide

prex-list name Enter the name of the prex list.

NOTE: There is a 140-character limit for prex list

names.

summary Display a summary of RPF routes.

Command Modes EXEC

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0.0.0 Introduced on the Z9000.

8.3.10.0 Introduced on the S4810.

Related Commands

• ipv6 prex-list — congure an IPv6 prex-list.

IPv6 MBGP Commands

Multiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout the internet and connecting multicast

topologies between BGP and autonomous systems (AS). FTOS MBGP is implemented as per IETF RFC 1858.

show ipv6 mbgproutes

Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.

Syntax

show ipv6 mbgproutes ipv6-address prefix-length | summary

Parameters

ipv6-address prex-

length

(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length in

the /x format. The range is from /0 to /128.

NOTE: The :: notation species successive hexadecimal elds of zeros.