Users Guide

RX - Debug Counter 1 0
RX - Debug Counter 2 0
<output truncated for brevity>
show hardware buer-stats-snapshot
Displays buer statistics tracking resource information for a specic interface.
Syntax
show hardware buffer-stats-snapshot resource interface interface {{priority-
group {id | all} | queue ucast {id | all} mcast {id | all} | all} [detail]}
Parameters
interface interface
Enter any of the following keywords and the interface information:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
queue
Enter the keyword queue followed by all for displaying details of all queues, ucast
queue-id or all for displaying Unicast queue details, and mcast queue-id or all for
displaying Multicast queue details.
priority-group Enter the keyword priority-group followed by id for specic priority-group or
keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/multicast buer usage on
per-port per-queue basis. For CPU port, counters for queues 0 to 11 displays and there is no dierentiation
between unicast and multicast queues.
478 Debugging and Diagnostics