Users Guide
File Management
This section contains command line interface (CLI) commands needed to manage the conguration les, as well as other le management
commands.
Topics:
• boot system
• cd
• copy
• delete
• dir
• format
• fsck ash
• mkdir
• mount nfs
• rmdir
• upgrade system
• HTTP Copy via CLI
• rename
• restore factory-defaults
• show boot system
• show bootvar
• show le-systems
• show os-version
• show running-cong
• show startup-cong
• show version
• upgrade
boot system
Specify the location where the Dell Networking OS image used to boot the system is stored.
Syntax
boot system {gateway ip-address | stack-unit {stack-unit-number | all} {default
| primary | secondary} {ftp: | nfsmount: | system: {A: | B: | bmp-boot} | tftp:
| usbflash:}}
To return to the default boot sequence, use the no boot system command.
Parameters
gateway Enter the IP address of the default next-hop gateway for the management subnet.
ip-address Enter an IP address in dotted decimal format.
stack-unit Enter the stack-unit number for the master switch.
3
56 File Management