Users Guide

cd
Change to a dierent working directory.
Syntax
cd [flash: | usbflash:] <directory name and path>
Parameters
ash: Use the keyword flash: to change the current directory to internal ash and its sub
directories.
usbash: Use the keyword usbflash: to change the current directory to the inserted USB.
directory name and
path
Enter the directory name and path as follows: directory name
([[flash://]directory_path])
NOTE: The cd command without any arguments will change the current directory to ash:
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added NFS mount support. Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
copy
Copy one le to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, HTTP, TFTP, and SCP (in the hostip
eld).
Syntax
copy source-file-url destination-file-url
Parameters
compressed-cong Enter the keywords compressed-config to copy a le from the current system
conguration.
ash: Enter the keyword flash: to copy from the local le system
([flash://]filepath).
ftp: Enter the keyword ftp: to copy from the remote le system, IPv4, or IPv6, (ftp://
userid:password@hostip/filepath) .
58 File Management