Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage Information Queriers normally send some queries when a leave message is received prior to deleting a group from the
membership database. There may be situations when you require a fast deletion of a group. When you enable
IGMP fast leave processing, the switch removes an interface from the multicast group as soon as it detects an
IGMP version 2 leave message on the interface.
ip igmp snooping ood
This command controls the ooding behavior of unregistered multicast data packets.
Syntax
ip igmp snooping flood
To undo this conguration, use the no ip igmp snooping flood command.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Seris and S-Series.
7.7.1.0 Introduced on the E-Series.
E-Series legacy
command
594 Internet Group Management Protocol (IGMP)