Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Added the ingress-port parameter for the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information By default, Dell Networking OS distributes incoming trac based on a hash algorithm using the following criteria:
• IP source address
• IP destination address
• TCP/UDP source port
• TCP/UDP destination port
load-balance hg
Choose the trac ow parameters the hash calculation uses while distributing the trac across internal higig links.
Syntax
[no] load-balance hg {ip-selection | ipv6-selection [source-ip | source-ipv6 |
source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-
module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [source-mac
| source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id
| vlan | ethertype | source-dest-mac ] | tunnel [ipv4-over-ipv4 | ipv4-over-
gre-ipv4 | mac-in-mac]}
Parameters
{{ip-selection| ipv6-
selection [source-ip
| source-ipv6 |
source-port-id |
source-module-id |
dest-ip | dest-ipv6 |
dest-port-id | dest-
module-id | protocol
| vlan | L4-source-
port | L4-dest-
port ]
To use IPv4 key elds in hash computation, enter the keyword ip-selection then one
of the parameters. To use IPv6 key elds in hash computation, enter the keyword ipv6-
selection
then one of the parameters.
• source-ip — Use IPv4 src-ip eld in hash calculation.
• source-ipv6 — Use IPv6 src-ip eld in hash calculation
• source-port-id — Use src-port-id eld in hash calculation.
• source-module-id — Use src-module-id eld in hash calculation.
• dest-ip — Use IPv4 dest-ip eld in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip eld in hash calculation
• dest-port-id — Use dest-port-id eld in hash calculation.
• dest-module-id — Use dest-module-id eld in hash calculation.
• protocol — Use IPv4 protocol eld in hash calculation.
• vlan — Use vlan eld in hash calculation.
726 IPv4 Routing