Users Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Regular evaluation optimization enabled/disabled added to display output.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Example
Dell# show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [vrf vrf-name] hostname | ip-address [mask] [longer-prefixes] |
list prefix-list | protocol [process-id | routing-tag] | all | connected |
static | summary]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the VRF name to list the routes in the
route table of a specic VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view more
detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP
address parameter.
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prex.
list prex-list (OPTIONAL) Enter the keyword list and the name of a congured prex list. For more
information, refer to the show ip route list command.
744 IPv4 Routing