Users Guide

Usage Information When you execute this command, IS-IS does not download the route to the routing table if the same route was
redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you do not specify an
encryption type or hmac-md5 keywords, the password is processed as plain text
which provides limited security.
Defaults No default password.
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage Information The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number PDUs (CSNPs),
and partial sequence number PDUs (PSNPs).
Related Commands
• area-password — congure an IS-IS area authentication password.
• isis priority — congure the authentication password for an interface.
graceful-restart ietf
Enable graceful restart on an IS-IS router.
Syntax
graceful-restart ietf
Intermediate System to Intermediate System (IS-IS) 807