Users Guide

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0(0.0) Added support for IPv6 for the file-url parameter.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage Information

RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in square

brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or without the

square brackets.

Reload Dell Networking OS after executing this command. To copy Dell Networking OS from the management unit

to one or more stack members, use the upgrade system stack-unit (S-Series stack member)

command.

Example

Dell# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/filepath)

scp: Copy from remote file system (scp://userid:password@hostip/filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

Dell# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

....................................!

12946259 bytes successfully copied

Dell# reload

Dell#

82 File Management