Users Guide
Version Description
7.8.1.0 Introduced
Usage Information
Modications to the ACL do not have an immediate eect on the sa-cache.
To apply the redistribute lter to entries already present in the SA cache, use the clear ip msdp sa-cache
local command.
ip msdp sa-lter
Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specied peer.
Syntax
ip msdp sa-filter {in | out} peer-address list [access-list name]
Remove this conguration using the no ip msdp sa-filter {in | out} peer address list
[access-list name] command.
Parameters
in Enter the keyword in to enable incoming SA ltering.
out Enter the keyword out to enable outgoing SA ltering.
peer-address Enter the peer address of the MSDP peer in a dotted decimal format (A.B.C.D.).
access-list name Enter the name of an extended ACL that contains permitted SAs. If you do not use this
option, all local entries are blocked.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the E-Series.
934 Multicast Source Discovery Protocol (MSDP)