Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

971

972

973

974

975

976

977

978

979

980

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Related Commands

• ipv6 nd ra-guard enable — congure the RA guard related commands.

• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy

conguration mode.

mtu

Enable the verication of the congured maximum transmission unit (MTU) value in the received RA packets.

Syntax

mtu value

To reset the MTU value, use the no mtu value command.

Parameters

value Enter the maximum transmission unit value in bytes. The range is from 1,280 to 11,982

bytes.

Defaults 0