Users Guide

Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy
conguration mode.
retrans-time
Enable the verication of the congured retransmission timer value in the received RA packets.
Syntax
retrans—timer value
To reset the advertised retransmission interval, use the no retrans-timervalue command.
Parameters
value Enter the advertised retransmission time interval in milliseconds. The range is from 100 to
4,294,967,295 milliseconds.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Related Commands ipv6 nd raguard policy policy-name — dene the router advertisement (RA) guard policy name and enter the RA
guard policy conguration mode.
ipv6 nd ra-guard enable — congure the RA guard related commands.
router-lifetime
Set the router lifetime.
Syntax
router—lifetime value
Neighbor Discovery Protocol (NDP) 975