Users Guide

• track interface line-protocol
show track ipv6 route
Display information about all tracked IPv6 routes, including conguration, current tracked state (UP or DOWN), and the clients which are
tracking an object.
Syntax
show track ipv6 route [brief]
Parameters
brief (OPTIONAL) Display a single line summary of information for tracked IPv6 routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track ipv6 route command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type slot/
port, IP route ip-
address, IPv6 route
ipv6-address
Displays the interface type and slot/port number or address of the IPv4/IPv6 route that is
being tracked.
object is Up/Down Up/Down state of tracked object; for example, IPv4 interface, reachability or metric
threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has changed and the time since the
last change in hours:minutes:seconds.
First hop interface Displays the type and slot/port number of the rst-hop interface of the tracked route.
Tracked by Client that is tracking an object’s state; for example, VRRP.
Example
Dell# show track ipv6 route
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:30
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/4 IPv6 VRID 1
Object Tracking 993