Administrator Guide

Version Description
E-Series legacy
command
Usage Information Network administrators use static mroutes to control the reach-ability of the multicast sources. If a PIM-registered
multicast source is reachable using static mroute as well as unicast route, the distance of each route is examined
and the route with shorter distance is the one the PIM selects for reach-ability.
NOTE: The default distance of mroutes is zero (0) and is CLI congurable on a per route
basis.
Example
Dell# show ip rpf
RPF information for 10.10.10.9
RPF interface: Gi 3/4
RPF neighbor: 165.87.31.4
RPF route/mask: 10.10.10.9/255.255.255.255
RPF type: unicast
Multicast 1031