Administrator Guide
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
S3048–ON
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost
[reference-bandwidth ref-bw] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per second. The range is from 1
to 4294967. The default is 100 megabits per second.
Defaults 100 megabits per second.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.9(0.0)
Introduced on the S6000-ON, S6000, S4820T, S4810, S5000, Z9500, S3048-ON, and
S4048-ON
Usage Information
Example
Dell# show running-config ospf
!
ipv6 router ospf 10
log-adjacency-changes
auto-cost reference-bandwidth 2000
Dell(conf-ipv6-router_ospf)# auto-cost reference-bandwidth ?
<1-4294967> Reference bandwidth in Mbits/second (default = 100)
Dell(conf-ipv6-router_ospf)# no auto-cost ?
reference-bandwidth Use reference bandwidth method to assign OSPF cost
<cr>
Dell(conf-ipv6-router_ospf)#
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-conguring the process.
Syntax
clear ipv6 ospf [vrf vrf-name] process
Open Shortest Path First (OSPFv2 and OSPFv3) 1151