Administrator Guide

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.1.(0.0) Introduced on the S4810 and Z9000.

7.8.1.0 Added support for the C-Series.

7.4.1.0 Introduced on the E-Series.

8.3.19.0 Introduced on the S4820T.

Usage Information

The time interval between hello packets must be the same for routers in a network.

Related Commands

• ipv6 ospf dead-interval – specify the time interval between hello packets was received from a router.

ipv6 ospf priority

To determine the Designated Router for the OSPFv3 network, set the priority of the interface.

Syntax

ipv6 ospf priority number

To return to the default time interval, use the no ipv6 ospf priority command.

Parameters

number

Enter the number as the priority. The range is from 1 to 255.

Defaults 1

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.