Administrator Guide
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Expanded the command to permit conguration on port channels.
6.1.1.1 Introduced on the E-Series.
Usage Information
To honor all incoming 802.1p markings on incoming switched trac on the interface, enter this command. By
default, this facility is not enabled (that is, the 802.1p markings on incoming trac are not honored).
You can apply this command on both physical interfaces and port channels. When you set the service-class
dynamic for a port channel, the physical interfaces assigned to the port channel are automatically congured; you
cannot assign the service-class dynamic command to individual interfaces in a port channel.
• All dot1p trac is mapped to Queue 0 unless you enable the service-class dynamic dot1p command
on an interface or globally.
• Layer 2 or Layer 3 service policies supersede dot1p service classes.
strict-priority queue
Congure a unicast queue as a strict-priority (SP) queue.
S3048–ON
Syntax
strict-priority queue unicast number
Parameters
unicast number Enter the keyword unicast then the queue number. The range is from 1 to 3.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Quality of Service (QoS) 1263