Administrator Guide

13 1 L2ACL 400 200 Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the congured WRED proles.
S3048–ON
Syntax
threshold min number max number max-drop-drop
To remove the threshold values, use the no threshold min number max number command.
Parameters
min number Enter the keyword min then the minimum threshold number for the WRED prole. The
range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number for the WRED prole. The
range is from 1 to 9360 KB.
max-drop-drop
number
Enter the keyword max-drop-drop followed by the maximum number of packets for the
WRED prole. The range is from 0 to 100 KB
Defaults none
Command Modes CONFIGURATION (cong-wred)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage Information To congure the minimum and maximum threshold values for user-dened proles, use this command. Additionally,
to modify the minimum and maximum threshold values for the pre-dened WRED proles, use this command. If
you delete the threshold values of the pre-dened WRED proles, the proles revert to their original default values.
Quality of Service (QoS) 1303