Administrator Guide

Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
default-information originate
Generate a default route for the RIP trac.
S3048–ON
Syntax
default-information originate [always] [metric metric-value] [route-map map-
name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to enable the switch software to always
advertise the default route.
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 1 to 16. The default is 1.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route-map.
Defaults Disabled. Metric: 1.
Command Modes ROUTER RIP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Routing Information Protocol (RIP) 1317