Administrator Guide
Remote Monitoring (RMON)
The Dell Networking OS remote monitoring (RMON) is implemented on the S3048–ON platform.
Dell Networking OS RMON is based on IEEE standards, providing both 32-bit and 64-bit monitoring and long-term statistics collection. Dell
Networking OS RMON supports the following RMON groups, as dened in RFC-2819, RFC-3273, RFC-3434, and RFC-4502:
• Ethernet Statistics Table; RFC-2819
• Ethernet Statistics High-Capacity Table; RFC-3273, 64bits
• Ethernet History Control Table; RFC-2819
• Ethernet History Table; RFC-2819
• Ethernet History High-Capacity Table; RFC-3273, 64bits
• Alarm Table; RFC-2819
• High-Capacity Alarm Table (64bits); RFC-3434, 64bits
• Event Table; RFC-2819
• Log Table; RFC-2819
• User History; RFC-4502
• Probe Conguration (Capabilities, SoftwareRev, HardwareRev, DateTime and ResetControl); RFC-4502
Dell Networking OS RMON does not support the following statistics:
• etherStatsCollisions
• etherHistoryCollisions
• etherHistoryUtilization
NOTE
: Only SNMP GET/GETNEXT access is supported. Congure RMON using the RMON commands. Collected data is lost
during a chassis reboot.
Topics:
• rmon alarm
• rmon collection history
• rmon collection statistics
• rmon event
• rmon hc-alarm
• show rmon
• show rmon alarms
• show rmon events
• show rmon hc-alarm
• show rmon history
• show rmon log
• show rmon statistics
44
1342 Remote Monitoring (RMON)