Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1431

Defaults The internal ash (flash:) is the default directory.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

Usage Information To congure the switch as an SCP server, use the ip ssh server command.

Related Commands

• ip ssh server — enables the SSH and SCP server on the switch.

ip ssh authentication-retries

Congure the maximum number of attempts that should be used to authenticate a user.

Syntax

ip ssh authentication-retries 1-10

Parameters

1-10 Enter the number of maximum retries to authenticate a user. The range is from 1 to 10.

The default is 3.

Defaults 3