Administrator Guide

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Updated the start-day and end-day options to allow for using the three-letter
abbreviation of the weekday name.
6.1.1.0 Introduced on the E-Series.
Related Commands
• ntp trusted-key — congures a trusted key.
• clock summer-time date — sets a date (and time zone) on which to convert the switch to daylight saving time
on a one-time basis.
• show clock — displays the current clock settings.
clock timezone
Congure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone conguration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
oset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to universal time
coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number of hours.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
System Time and Date 1615